Voopoo Drag 4 Screen Not Working
The VOOPOO Drag 4 Box Mod Kit is a perfect device for vapers. The Voopoo Drag 4 device is known for its elegant design, high performance , and powerful technologies. However, like any other gadget, it has its weaknesses. One of the most frequent complaints among customers is the non-functioning screen. This guide, regardless of whether the screen is blank, flickering, or non-responsive, will assist you in determining the issue and pinpoint the problem and step by step guide to fix your problem.
The VOOPOO Drag 4 Box Mod Kit stands out in being both luxurious and practical. With stunning wooden panels along with a very powerful Gene.TT chipset, this is a brand that many vapers appreciate. But even the finest devices out there are bound to have some issues. A damaged screen could spoil your vape session as it renders you unable to change the settings or see any information on your device.
In this blog, we will focus on the possible reasons for the Voopoo Argus screen’s failure to function and advance the fixes to enable you commence vaping without any setbacks.
Symptoms of a Malfunctioning Screen
Identifying the symptoms is the first step in overcoming the problem. Common problems with the screen of Voopoo Drag 4 are:
- Black Screen: The machine is switched on but the screen is completely off.
- Flickering of the Display: The screen blinks and it becomes difficult to read the screen.
- Low brightness: The screen works but is too weak to see any words on it.
- No display: Only the buttons are operational but the display screen does not project anything.
If you have any of the problems listed above, you should follow the troubleshooting steps provided below.
Why Does the Screen Malfunction?
As the root cause of the problem gives an insight into how it can be fixed, this section looks at all possible reasons which would make the Voopoo Drag 4’s screen to stop functioning. These are:
Battery Issues
The Voopoo Drag 4 device is powered by two 18650 batteries. Batteries that have been poorly installed or are faulty can result in failure of the screen.
Firmware Bugs
The failure of screens could also be attributed to outdated firmware or software issues. The Gene.TT chip set requires up to date firmware for its optimal operation.
Hardware Damage
The failure of the screen or internal components can happen as a result of unintentional drops or moisture exposure.
Internal Connection Problems
The wiring which connects the screen and the chipset is located inside the device and may get loose or damaged which would interfere with the connection.
Quick Checks Before Troubleshooting
Prior to looking for detailed solutions, begin with simple checks such as these:
Verify Battery Installation
Make sure you have placed the batteries of Voopoo Drag 4 the right way round. Batteries that have not been positioned correctly in respect to their polarity (+/-) risks having the device not working.
Power On the Device
Push the power switch five times in quick succession. If nothing happens, the problem could be with the battery or wires connected within the device.
Check for Any External Damages
Scan for damages on the screen such as scratches. If there are signs of physical damage, it is best to have it serviced or repaired.
Step-by-Step Troubleshooting In Voopoo Drag 4
If the quick checks do not solve the problem then go through the following steps in detail:
Check The Battery Status First
Old and faulty batteries should be replaced with new and high quality 18650 batteries. Cheap batteries may not support the screen.
Clean Contacts Of Batteries
Power transfer can be interrupted by dust or dirt on battery contacts. Use a cotton swab dipped in the isopropyl alcohol to clean the contacts and assure power transfer.
Check Battery Insertion
There’s a possibility that the batteries are inserted improperly. Batteries which are inserted upside down may not work.
Resolving Firmware Glitches
The Gene.TT chipset in the Drag 4 requires regular firmware updates to function optimally. Outdated firmware can cause various glitches, including screen issues.
Steps to Update Firmware
- Step 1. Go to the VOOPOO official site.
- Step 2. Search for the latest Voopoo Drag 4 firmware and download it.
- Step 3. Plug in the device to the PC via USB-C cable.
-
Step 4. Proceed with Software Installation Steps on the screen.
Firmware updates are also important in that when some problems are having been dealt with, some other capability will be integrated.
Fixing Display Settings
If your VOOPOO Drag 4 screen is not operating as normal, it could be because of poor display options. At times, the screen does not show anything because of blank settings and not due to the hardware not working. This is what the procedure would look like on how to fix this issue in order:
Adjust Screen Brightness:
Brightening the screen has a good number of chances to fix a blank or low screen problem. The Voopoo Argus has adjustable brightness levels, and someone may have turned the screen down so low that it looks like it is off. Here is how to perform brightness modifications:
The + and – buttons on the Voopoo Drag 4 have been incorporated to change the device settings like screen brightness.
Press the two buttons at the ‘+’ and ‘–’ ends at the same time and hold on to it. This allows the Voopoo Drag 4 to enter into a brightness adjusting mode.
When in adjustment mode, once again press the ‘+’ button to increase the screen brightness further and further until satisfactory level. When making these changes, control the screen in order to reach the most adequate level and make the changes.
This appears to be the most important change that must take place, firstly confirm that the brightness has been increased while the device has been turned on and multiple lighting has been shown to it.
Pro Tip: Even after changing the brightness, if the screen does not respond to any actions, then the problem is not with the display settings and instead is probably a problem like a power issue or firmware problem.
Reset Display Settings
If adjusting the brightness doesn’t resolve the issue, resetting the display settings to their factory defaults can often fix software-related glitches. This process ensures that any accidental or incorrect setting changes are reverted in Voopoo Argus.
First and foremost, Voopoo drag 4 needs to be turned off otherwise while going through the process of retrieving settings it may turn on by itself. Press the fire button five times quickly to power it down.
Power the Voopoo Drag 4 device back on by pressing the fire button five times. Once the device is on, navigate to the settings menu by holding down the + and - buttons together until the menu appears.
Now, within the settings menu, go activate the enable button and search for the reset option. The fact such a place exists on the settings menu has been confirmed. It will be understood that as such a place was defined by the firmware version, so refer to the user manual if needed.
There are only two buttons on the Voopoo Drag 4 device's top, a + and a – sign for navigating through the menu and a fire button that is pressed to verify factory reset. The configurations which were done on the device by the user are deleted totally. The factory reset means that all operations that are performed by the user are erased and the device is restored to its normal conditions.
With the use of Voopoo Drag 4 device has to be restarted after which the screen is checked whether it is working or not.
Attention: Let the users be advised that setting default settings will wipe any and all changes done by the user and it may require k, and the coil’s resistance to be set once more.
Examining Hardware Problems
Inspect for Physical Damage:
Look for crack lines and other forms of defects on the device’s screen as well as body surfaces. In most cases, physical damage calls for repairs or a change of screen.
Check Internal Connections:
If you’re comfortable with electronics, carefully open the device to inspect internal connections. Loose wires can often be re-secured to restore functionality.
Advanced Repairs and Replacement
In some advanced problem, you may need to use advanced solutions, for example:
Reasons to Seek Advanced Help
In case the problem persists, the best approach is to engage a certified tech or connect with VOOPOO support for direction.
Claims on Warranty
Make sure the warranty is not out of date. If any damages are covered under the warranty, then a repair or new device will be given without any charges.
Preventive Measures to Avoid Screen Issues
Prevention is always better than cure. Here’s how to avoid screen problems in the future:
Regular Maintenance
- Periodically clean the battery contacts and charging port.
- Remove dust or debris that might interfere with device functions.
Handle with Care
Avoid dropping the device or exposing it to moisture. Use a protective case to minimize the risk of damage.
Keep Firmware Updated
Regularly check for and install firmware updates to ensure the Gene.TT chipset functions without glitches.
Conclusion
Your VOOPOO Drag 4's screen malfunction can be annoying, but most problems can be resolved with simple troubleshooting. If your device has a hardware issue, firmware bug, or battery problem, this article gives you the tools you need to fix it. You may prevent future issues and have a smooth vaping experience by doing routine maintenance and handling with care.
Discover the best vaping devices and accessories at VapeUniverse, your ultimate destination for all things vape.
Check out our other blogs for more vaping tips and insights!
VOOPOO Argus G2 Comprehensive Guide: Cheap price
VooPoo Argus GT2 Kit: Overhyped or Worth the Price?
VOOPOO Argus GT Kit Review: Affordable and Versatile
Think You Know Vaping? The VOOPOO Argus A 30W Will Change Your Mind
Experience Flavor Like Never Before: VOOPOO ARGUS P2 Unveiled