
Smok Rpm 4 Problems
Share
With a strong and user-friendly design, the Smok RPM 4 is a pod system widely appreciated for its compact size. It is one of the most popular and used pod systems offering a satisfying vaping experience for a lot of vapers. However, there seem to be some issues with the device, as with most electronic devices. Users seem to have problems that affect the vape’s overall performance.
You are not alone if you're experiencing battery drainage, coil burnout, firing, or minor leaking issues. Many Smok RPM 4 users report similar problems and issues. While such issues can be very frustrating, most of these problems are common and have simple fixes. If proper maintenance is adopted, and maintenance is done while taking care of the device, these problems can be avoided in the first place.
The most common pod issues users face with the Smok RPM 4 and their solutions will be mentioned in this guide. No matter the problem, whether it’s a minor glitch, a major concern, or anything in between, we’ve got you covered with practical troubleshooting steps. Following these will enable you to have a smooth device and a hassle-free vaping experience.
Leaking Problems
Reasons Why it Leaks
Leaking is a potential problem that can occur on any device, and the Smok RPM 4 is not an exception. Leaking might occur when the pod is overfilled, which increases the pressure and forces e-liquid out. Another cause of e-liquid leakage would be failing seals which are damaged or simply worn out. If the e-liquid used is of the wrong thickness, especially if its consistency is too weak, the leaking issue is bound to occur during absorption. Furthermore, a coil that is mounted incorrectly might not seal properly, which leads to leakage around the Smok RPM 4 coils.
How to Solve These Problems
In order to stop the leakage, it is advisable to fill the pod below the max limit to enable the device to function without problems. Make sure that the seals are checked and maintained regularly and, if necessary, some are replaced to ensure there is no breakage. Choosing a 50:50 VG to PG e-liquid blend should theoretically help with the leakage issue. If the coil is too loose, make sure to take it out and put it back in to create a tight seal. Regular cleaning of the Smok RPM 4 pods and device would reduce e-liquid build up that leads to leaking.
Battery Draining QuicklyÂ
Factors for Fast Battery DrainageÂ
If the Smok RPM 4 device you have runs out of battery so quickly, it could be owing to high wattage that is being set. This makes vaping harder. One can work themselves to exhaustion without a break. Older batteries drain quickly. Leaving the device idle for long periods also ends up draining the battery slowly but surely.
How to Improve Battery LifeÂ
Lowering the wattage setting will save on power consumption and increase the battery life. Rather than consuming all the power in one puff, take sips in intervals. while the device is not in use, simply switch it off. Once the work is done, the device will be charged. If the device simply runs out of juice too much, consider switching it out or replacing the battery. Charging the device properly with a correct USB C will prevent damaging the battery.
Coil Burning Too Fast
Causes Of Quick Coil BurnoutÂ
Coil burns are the reason for an amazing vape experience and are typically caused due to failure to prepare the coil properly. If a coil is not ‘prepared', a single puff can make it burn. Puffing at higher than required watt level means the coil gets overused.
Ways To Reduce Coil Degrade
To minimize coil dirt, always start by priming the coil to ensure it's saturated with e-liquids. Always vape within the recommended wattage limits. Use e-liquids with less sweeteners to cut down the coil dirt. Just inhaling is not enough – waiting for a few seconds gives the coil time to cool. Keeping on top of maintenance keeps your coils and your bank account scared of running low.
Device Not Firing
Why Your RPM 4 Will Not Fire
The first item to check when your Smok RPM 4 is not firing is whether it’s out of battery charge. Make sure that the coil is properly attached as a loose coil will also prevent the device from firing. Dirt may have collected around the fire button interfering with its functionality. Another ordinary cause could be the device being in a locked position and needing to be manually unlocked.
Steps to Fix It
Begin by switching the device back on after fully charging it. Make sure that the pod is first removed and the coil completely reattached. If the button is jammed or needs cleaning, carefully restore its functionality. For device unlocking, the manufacturer’s instructions can be followed using the fire button. If the device still does not respond, repairs or factory reset may be necessary.
Weak Or No Vape Production
Possible Causes
Having weak or no vapor production could be due to the battery power being low. Reduced vapor production could be the result of too low an output wattage. A coil that is not properly set may not heat sufficiently and so gives off weak vapor. Clogged airflow vents restrict the intake of air, thus affecting vapor production. Lastly, poor performance can also be associated with a worn-out coil using past its shelf life.
Fixing Low Vapor OutputÂ
Charging the Smok RPM 4 and cleaning clogged airflow is necessary to improve weak vapor production issues. In normal circumstances a device should be charged routinely even when it is in a good state. One of the mechanical failures could be that the coil is not tightly wound. This should be checked regularly just in case it was not fitted properly. Old coils will also need to be checked and if found inefficient will need to be replaced so the device can function well.
Auto Fire Issue
Why It Happens
Auto firing, such as when a Smok RPM 4 discharges without being triggered, is usually the result of the fire button being stuck or malfunctioning. If there is too much e-liquid, it can cause leakage which can lead to a short circuit or a device malfunction. There are also internal damages that can lead to a chipset malfunction which can result in unsought auto firing. This can pose a safety risk if not quickly attended to.
How To Stop Auto Firing
Start by cleaning around the fire button to help remove any dirt in the way. During cleaning, remove the pod from the rpm 4 Smok, as well as any devices that have liquid leaking to help the device dry. If the cleaning did not help with the problem and there was no improvement, Smok support should be contacted. The device may also need servicing or replacement if it tends to auto-fire too often.
Charging Problems
Issues With The USB Port
Charging issues are often caused by debris blocking the charging port, preventing proper connection. A faulty or damaged USB cable can also result in inconsistent charging. In some cases, a defective charging port inside the device may prevent it from receiving power correctly.
Appropriate Charging Procedures
To fix charging issues, always use the original USB-C cable provided by Smok. Avoid overcharging the device, as this can shorten battery life over time. Regularly clean the charging port with a dry brush or compressed air to remove dust and debris. If the problem continues, the charging port may need professional repair.
Screen Not WorkingÂ
Possible Cause for Display Issues
Your Smok Vape may not have a functional screen because the battery fails to provide power due to death, or internal connections are loose. Water or e-liquid damage too may have been done to the device and screen that causes the malfunction.
How To Fix the Screen
Start by charging the Smok Vape Pen fully and restarting it. Lightly tap the device to fix any possible loose internal connections. If the screen remains unresponsive, professional repair or replacement may be necessary. To prevent future damage, keep the device away from moisture and handle it carefully.
E Liquid Spit back
Why It Happens
When Smok rpm 4 coils become too hot while being vaped, they can eject excess vapor. This is often termed as ‘spit back’ with regards to e-vape products. If the device is set to high wattage, it can greatly overheat the coil and produce spit back as well. When too much e-liquid gathers in the mouthpiece it can also be a problem.
Preventing Spit back
Preventing overfill of the pod is one of the ways to lessen spit back since excess liquid can leak out and get into the coil. Continuously use the correct wattage for your e-liquid to avoid burn out of the coil and make sure to rinse the mouthpiece often to get rid of extra e-liquid that can block airways. Repairing and cleaning the device consistently and using the right vaping techniques will greatly lessen the spit back problem.
Preventative Maintenance Tips
To keep your Smok RPM 4 Kit running smoothly, follow these maintenance tips:
- Clean the device regularly: Wipe down the pod, battery, and connections weekly.
- Prime your coils: Always let the coil soak in e-liquid before first use.
- Use the right e-liquid: Avoid thick, sweet e-liquids that gunk up the coils.
Conclusion
The Smok RPM 4 is a fantastic pod system, but like all vaping devices, it can run into problems. Fortunately, most of these issues can be fixed with simple troubleshooting. By following the solutions in this guide and maintaining your device properly, you can enjoy a smooth vaping experience without the hassle.
Get the best deals on Smok RPM 4 and other top vaping products at Vape Universe, shop now for premium quality and unbeatable prices.
Explore More Blogs!
Difference between Geek Bar Pulse X 25K and Platinum Edition
How To Charge Off Stamp Vape Without Charger
How To Fix Ohms Too Low Smok Novo 4
How To Turn Off Power Lock On Smok Nord 5
Smok Novo 2 Blinking 4 Times How To Fix